A powerful and compact dust extraction system ideal for positioning under the work bench to collect dust from scroll saws, jig saws, bandsaws, bandfacers and linishers, especially when working with wood and plastics. This unit is quick and easy to install.
Filter area: 4 needle felt 'V' shape filters @ 2.07 sq.ft per filter : Total area: 8.3 sq.ft. : Low operating noise levels: 66Db @ 1 metre. : Standard inlet: 2". : Air Volume (max) 550 m3 /hr : Max Pressure 1655Pa : Filter Area 8.3 sq ft : Storage capacity 0.6 cu. ft. : Explosion Relief Vent. : Motor 3/4 hp, 0 .55Kw : TEFC IP55 squirrel cage motor.: Inlet 50mm & 100mm ø : Filtration: Terylene needlefelt filter - 0.8m2 with baffled air diffuser - manual shaker. : Sound Level: 66 dba @ 1.5m free field : Inlet size: Equivalent to 100mm dia. spigot. : Static Pressure Gauge, including 50mm spigot on plate and lid stiffeners. CONSTRUCTION: Constructed in mild steel sheet with welded and sealed joints, with lift off side panel access door and steel waste tray. All internal parts in primer finish. External surfaces finished in Grey and red enamel paint. INCLUDES: Single push button start. : Explosion relief facility included. POWER: 230V : 1 phase : 50Hz : 3.6Amps OPTIONS: Possibility of adding extra inlets INSTALLATION: Floor fix and hard wire. DIMENSIONS: W710mm x D900mm x H500mm : Weight 65 kg