Product Detail

< Back

DUST CONTROL - DUST CONTROL UNIT  M50 - 1 PHASE
Enlarge
DUST CONTROL - DUST CONTROL UNIT M50 - 1 PHASE
Item Code:HME1089
Out Of Stock

Technical Details

PRODUCT: A powerful and compact dust extraction system ideal for collecting dust from bandsaws, bandfacers, grinders and linishers. The filters utilised are of an envelope or conical design, the unit is fitted with a dust tray for the collection of waste and is available for use with a 230V/1/50Hz or 400V/3/50Hz supply.Manual filter shaker mechanisms are used for the cleaning of filters.The height of an MS50 does not lend itself to this application of mounted machines. A castor base is available where full mobility is required. For the MS50, an optional explosion relief and a blast barrier are available when used with explosive dusts & 400 Volts 50 Hz 3 Phase with manual shaker device and built-in sound attenuator. SPECIFICATIONS: Versatile inlet positions. : Low operating noise levels. : Useful worktop. : Filter: Cotton fitted as standard, Terylene needle felt optional. : Filter Area: 50 sq.ft. : Fitted with 1 x Ø5" inlet. : Powered by 1.5kW motor. : Motor 2 HP 1.5Kw : Air Volume (max) 1590m3/ hr : Max Pressure 1750Pa : Filter Area 50 sq ft : Explosion Relief Vent. : Inlet 125 mm ø : Shaker Manual : Static Pressure Gauge including Blastgate Barrier, Needlefelt Filter Media CONSTRUCTION: Heavy duty steel construction with tough powder coat finish INCLUDES: Shaker handle: RHS standard, LHS optional POWER: 230V : 1phase : 50Hz : 10Amps OPTIONS: Alternative inlet positions available. : No volt release starter wired and fitted as an optional extra. : Castors. : Wide range of collector nozzles for most manufacturers' machines. INSTALLATION: Floor fix and hard wire. DIMENSIONS: W 695mm x D 800mm x H 1135 mm : Weight 114kg

View Datasheet View Datasheet
Your basket is empty