A self-contained, easy to use heat treatment unit for the heating of metal for forging operations.

- Ready to use in five minutes from cold.
- Single control valve for flame regulation.
- Gas pressure switch.
- Automatic pilot ignition
- Push button starter with no volt and overload release.
- Automatic leak or open valve detection check at every operation.
- Safety lock out in the event of electrical or gas failure.
- Compliant to Gas Appliance Directive BS EN203-1.

- Construction: Concrete slab Work area. Fireproof backing. Robust powder coated steel construction.

- Includes: 25 kg of Alumina Chips. Rake. Detachable fire pan (for servicing)

A self-contained, easy to use heat treatment unit for the joining of metal through brazing operations.

- Brazing torch station.
- Manual Air / Gas mix on Torches.
- Automatic start with Pre-Ignition Gas Integrity Check for open torches and appliance gas leaks.
- No volt and overload releases on starter.
- Safety lock out in the event of electrical, gas or air supply failure.
- Compliant to Gas Appliance Directive BS EN203-1

- Construction: Concrete slab Work area. Fireproof backing. Robust powder coated steel construction.

- Includes: 5 Fire resistant bricks. Concrete slab

A self-contained, easy to use heat treatment unit for the joining of metal through brazing operations.

- Brazing torch station.
- Manual Air / Gas mix on Torches.
- Automatic start with Pre-Ignition Gas Integrity Check for open torches and appliance gas leaks.
- No volt and overload releases on starter.
- Safety lock out in the event of electrical, gas or air supply failure.
- Compliant to Gas Appliance Directive BS EN203-1

- Construction: Concrete slab Work area. Fireproof backing. Robust powder coated steel construction.

- Includes: 10 Fire resistant bricks. Concrete slab

A self-contained, easy to use heat treatment unit for the joining of metal through brazing and forging operations. Ideal for use where space is limited.

- Brazing torch station.
- High performance main burner for forge.
- Gas and air controls.
- Gas pressure switch.
- Automatic pilot ignition
- Push button starter with no volt and overload release.
- Automatic leak or open valve detection check at every operation.
- Safety lock out in the event of electrical or gas failure.
- Compliant to Gas Appliance Directive BS EN203-1.

- Construction: Concrete slab Work area. Fireproof backing. Robust powder coated steel construction.

- Includes: Fire proof bricks. Detachable fire pan (for servicing).

A self-contained, easy to use heat treatment unit for the joining of metal through brazing and forging operations.

- Brazing torch station.
- Jewellery torch station.
- Central pilot light and Alumina chip forge.
- Manual Air / Gas mix on Torches.
- Automatic start with Pre-Ignition Gas Integrity Check for open torches and appliance gas leaks.
- Compliant to Gas Appliance Directive BS EN203-1

- Construction: Concrete slab Work area. Fireproof backing. Robust powder coated steel construction.

- Includes: 10Kg Alumina chips (5Kg required). 10 heat reflective blocks. Chip rake.

An automatic furnace for melting aluminium, bronze and brass, used in the casting of small components.

- Assisted tilting action.
- Automatic fail safe on gas, air and electrics.
- 5.6 kg A12 spouted crucible.
- Auto ignition sequence.
- Motorised blower.
- Unique vertical burner.
- Max Temp 1100 deg C approx

- Construction: Robust powder coated steel construction.

- Includes: Push button starter. Mushroom (emergency) stop.

HME0024 - Natural Gas      |      HME0025 - LPG

A natural draught furnace for melting aluminium, used in the casting of small components.

- Assisted tilting action.
- 5.6 kg A12 crucible.
- Flame failure device.
- Piezo Ignitor.
- Vertical burner.
- Max Temp 900 deg C approx

- Construction: Robust powder coated steel construction.

      HME0026 - Natural Gas, Fired      |      HME0027 - LPG, Fired

A robust and compact gas kiln used in the enamelling of metals.

- Chamber size: W 235 x D 255 x H 142 mm.
- Temperature range: Up to 1000oC
- Energy saving burner.
- Heat resistant lining.

- Construction: Robust powder coated steel construction.

- Includes: Temperature guage.

A self-contained, easy to use heat treatment unit for the joining of metal through brazing and forging operations. Also has the capacity to be used for metal melting functions.

- Brazing torch station.
- Manual Air / Gas mix on Torches.
- Forge burner with automatic ignition for pilot.
- Tilting Melting furnace, fitted with an A2 Crucible.
- Automatic start with Pre-Ignition Gas Integrity Check for open torches and appliance gas leaks.
- Compliant to Gas Appliance Directive BS EN203-1.

- Construction: Concrete slab Work area. Fireproof backing. Robust powder coated steel construction.

- Includes: 10Kg Alumina chips (5Kg required). Fire resistant lining. Emergency stop. Chip rake.

HME0034 - 700mm      |      HME0035 - 1200mm      |      HME0036 - 1400mm

A heavily constructed fabricated welding bench with refractory lined top surface and mild steel grid cover over the sand box allowing the bench to be used for cutting and welding.

- Cost effective
- Modular design
- Space saving
- Safe and easy to use
- Minimum maintenance
- Simple installation
- Suitable for CO2 and electric arc welding

- Construction: Robust powder coated steel construction

- Includes: Fire resistant bricks. All units are pedestal mounted, with built in storage shelf, and supplied fitted with an earth connection.

HME supply a variety of welding equipment in order to best fulfill your needs. These range from small portable machines, to larger more robust machines.

Hot Metal Equipment

 Back To Top